TPO and EPDM are the two most common single-ply flat roof membranes in the US. Both can last 20 to 30 years when installed well.
| TPO | EPDM | |
|---|---|---|
| Material | Thermoplastic, heat-welded seams | Synthetic rubber, taped or glued seams |
| Colour | White (reflective) is standard | Black is standard, white available |
| Planning cost, installed | ~$5.50–$11 / sq ft | ~$5–$10 / sq ft |
| Best climates | Hot, sunny, high cooling costs | Cold, freeze-thaw, hail-prone |
| Repairs | Weld a patch on clean, newer membrane | Simple patches with primer and tape |
| Track record | Since the 1990s, formulations improved | Since the 1960s |
Choose TPO if…
- Your building is in a hot climate or your cooling bills are high
- A cool roof is required by code (common in California and many cities)
- You want welded seams
Choose EPDM if…
- Your building is in a cold climate with freeze-thaw cycles
- You want easy, low-cost repairs
- It's a small residential flat roof, garage or porch
What matters more than the material
The installer. Most flat roof failures come from seams, flashing and drainage details. Choose a contractor certified by the manufacturer and ask for a system warranty.