Typical costs by material
| System | Installed, per sq ft | Typical life |
|---|---|---|
| TPO | $5.50–$11 | 20–30 yrs |
| EPDM (rubber) | $5–$10 | 20–30 yrs |
| PVC | $7–$14 | 20–30 yrs |
| Modified bitumen | $4–$9 | 15–25 yrs |
| Built-up (tar & gravel) | $5–$10 | 20–30 yrs |
| Spray foam (SPF) | $4.50–$8 | 30+ yrs with recoats |
| Silicone / acrylic coating | $1.50–$4.50 | +10–15 yrs |
Planning ranges for the US, compiled November 2026 from published cost guides (Fixr, Roofr, This Old House, RoofingCalc). Tear-off typically adds about $1–$3 per sq ft. Small roofs cost more per square foot. These are not quotes.
Tear-off or recover?
A recover installs a new roof over the existing one, saving tear-off and disposal costs. Building codes generally allow it only when there is a single existing roof and the old roof and insulation are dry and sound. A tear-off removes everything down to the deck, lets the roofer inspect and repair the deck, and allows new insulation that meets current energy code.
What should be in a replacement quote
- Membrane type, brand and thickness
- Insulation type, thickness and R-value, including any tapered insulation for drainage
- Tear-off scope and allowances for deck repair
- Flashing, edge metal, drains and penetrations
- Manufacturer warranty and contractor workmanship warranty
- Permit, disposal and cleanup
Comparing materials
See our guides to TPO, EPDM, PVC and modified bitumen, or use the flat roof cost calculator for a planning range.
Frequently asked questions
How much does a flat roof replacement cost?
Planning ranges for installed membranes run roughly $4 to $14 per square foot, plus about $1 to $3 per square foot for tear-off. A small residential flat roof and a 50,000 sq ft warehouse are very different projects, so get several written quotes.
How long does a flat roof replacement take?
A small residential roof often takes one or two days. Commercial roofs can take days to weeks depending on size, weather and access.
What's the best time of year to replace a flat roof?
Mild, dry weather is easiest for installation, and many adhesives and coatings have temperature limits. Roofers book up in late summer and after storms, so plan ahead.
Last reviewed November 2026.