How EPDM is installed
EPDM comes in large sheets, usually 45 or 60 mil thick, that are fully adhered, mechanically attached or ballasted with stone. Seams are joined with seam tape and primer rather than heat-welded. Large sheets mean fewer seams on most roofs.
Pros
- Long, proven service record
- Stays flexible in very cold weather and resists hail well
- Easy to patch: repairs are usually quick and inexpensive
- Often among the lower-cost membranes
Cons
- Standard black EPDM absorbs heat; white EPDM costs more
- Taped seams are the most common place for leaks on older roofs
- Can shrink with age and pull away at edges and flashings
Lifespan
EPDM roofs commonly last 20 to 30 years, sometimes longer on ballasted systems. Most failures happen at seams and flashings rather than in the field of the membrane, so regular inspections make a big difference.
Repair or replace?
Isolated leaks, open seams and punctures on EPDM can usually be patched. If the membrane is brittle, has widespread shrinkage, or the insulation beneath is soaked, replacement or a recover is usually better value. A roofer can test for wet insulation with a core cut or infrared scan.
Frequently asked questions
How much does EPDM roofing cost?
Planning ranges are roughly $5 to $10 per square foot installed, depending on tear-off, insulation, roof size and access. Small residential jobs cost more per square foot.
Is EPDM good for a flat roof on a house?
Yes. EPDM is one of the most common choices for flat-roofed homes, porches, dormers and garages because it is affordable and easy to repair.
Can EPDM be coated?
Yes. An EPDM-compatible coating can extend the life of a sound roof and make it reflective, but it won't fix wet insulation or failed seams underneath.
Last reviewed November 2026.