How TPO is installed
Sheets of TPO, usually 45, 60 or 80 mil thick, are laid over rigid insulation board and either mechanically fastened, fully adhered with bonding adhesive, or held down with ballast. The overlapping seams are fused with a hot-air welder, so the seam becomes a single piece of plastic rather than relying on tape or glue.
Pros
- Reflective white surface lowers cooling loads and can meet ENERGY STAR and cool-roof code requirements
- Heat-welded seams are typically stronger than taped or glued seams
- Usually cheaper than PVC
- Can often be installed over one existing roof layer, if code and the roof deck allow
Cons
- Formulations vary between manufacturers, and quality depends heavily on the installer's welding
- Less resistant to oils and grease than PVC, so it is a weaker choice for restaurant roofs with kitchen exhaust
- Thinner 45-mil membranes wear out sooner. Ask for 60 mil or thicker on a long-term building
Lifespan and warranties
A well-installed TPO roof commonly lasts 20 to 30 years. Manufacturers offer system warranties (often 15, 20 or 30 years) only when an approved contractor installs their full system and the work passes inspection. Ask each roofer whether they are certified by the membrane manufacturer and which warranty they can register.
Questions to ask a TPO contractor
- What membrane thickness and brand do you propose?
- Mechanically fastened or fully adhered, and why?
- Will you tear off the existing roof or recover over it? Have you checked for wet insulation?
- Is the manufacturer's warranty included, and who registers it?
- How will you handle drains, curbs, parapets and rooftop units?
Frequently asked questions
Is TPO better than EPDM?
Neither is better everywhere. TPO is white and reflective, which suits hot climates and buildings with high cooling costs. EPDM is black (white is available), very flexible in cold weather and has a long track record. Installer quality matters more than the choice between the two.
Can TPO go over an existing roof?
Often yes, if there is only one existing roof layer, the insulation underneath is dry and local code allows a recover. A contractor should take core samples or a moisture scan first.
How long does a TPO roof last?
Typically 20 to 30 years with good installation and routine maintenance.
Last reviewed November 2026.